3D Printer Accessory Finishing Tools – ABS PLA Filament Printing RepRap Makerbot

1. 2″ x 60yd Wide Roll of 3M Blue Painter’s Tape Great for covering the surface of the printer bed. The extruded material adheres very well to this tape, reducing warping and allowing for easy removal of the finished product. 2. Set of 6 finishing knives Six small carving blades ideal for clearing support material, removing plastic defects, and reaming out holes. A variety of tapered and angled shapes for reaching in difficult areas. 3. Print bed “Spatula” Small painter’s scraper for getting underneath printed parts and gently removing them from the print bed. Trying to lift parts from above often doesn’t work well or will damage delicate features. 4. 8oz Chemical Solvent Bottle Laboratory-grade chemical bottle for storing solvents or your own “ABS glue” (mixture of leftover plastic and solvent for making parts adhere). Solvents are the key to getting a shiny part finish. (Note: Bottle only! I cannot ship chemicals legally!) 5. 2 x Sheets of 240 Grit Sandpaper Fine sandpaper with enough texture to remove unwanted burs and rough edges. Each sheet is 9″x11″ 6. 2 x Sheets of 400 Grit Super-Fine Sandpaper Extremely fine sandpaper for getting a smooth finish on your printed parts. Each sheet is 9″x11″

Product Features

  • 1. 2″ x 60yd Wide Roll of 3M Blue Painter’s Tape Great for covering the surface of the printer bed. The extruded material adheres very well to this tape, reducing warping and allowing for easy removal of the finished product. 2. Set of 6 finishing knives Six small carving blades ideal for clearing support material, removing plastic defects, and reaming out holes. A variety of tapered and angled shapes for reaching in difficult areas.
  • 3. Print bed “Spatula” Small painter’s scraper for getting underneath printed parts and gently removing them from the print bed. Trying to lift parts from above often doesn’t work well or will damage delicate features.
  • 4. 8oz Chemical Solvent Bottle Laboratory-grade chemical bottle for storing solvents or your own “ABS glue” (mixture of leftover plastic and solvent for making parts adhere). Solvents are the key to getting a shiny part finish. (Note: Bottle only! I cannot ship chemicals legally!)
  • 5. 2 x Sheets of 240 Grit Sandpaper Fine sandpaper with enough texture to remove unwanted burs and rough edges. Each sheet is 9″x11″ 6. 2 x Sheets of 400 Grit Super-Fine Sandpaper Extremely fine sandpaper for getting a smooth finish on your printed parts. Each sheet is 9″x11″

Detailed Information available on our Homepage…

Published by

Best 3D Printer

3D Printing. The next Goldrush is on it´s way. Inside information on how to start printing in 3D, where to buy Printers, how to use them, and the newest Pictures and reviews of available 3D Printers.

Leave a Reply

Your email address will not be published. Required fields are marked *