MagiDeal 3D Printer Parts HT-NTC100K Thermistor Temperature Sensor High Temperature

Description:

Upgrade from the ordinary temperature probe directly exposed temperature measurement to resistance package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the heating block that support the thermocouple.
The temperature measurement range is increased from -50 °C~ +250°C to -50 °C ~ +350 °C. It helps a lot to print high-temperature filament, can replace the K-type thermocouple temperature. If need to print high-temperature filament, the HT-NTC100K thermistors are highly recommended.
The new version of HT-NTC100K temperature measuring thermistor adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers’ convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
Can be used with the new version of the heater (the new heater can heat up to 350 degrees).

Specification:

Model: HT-NTC100K thermistor temperature sensor components
Negative Temperature Coefficient (NTC) Thermistor Model: B3950
Temperature measurement head size: 3 * 15mm
Thermistor temperature measurement is stable. The temperature measurement of the upgraded HT-NTC100K can be up to 350 degrees, can effectively replace the K-type thermocouple. It helps much to solve the issues of strict requirements of K-type thermocouple wiring, and the line is long which is susceptible to get external interference and result in temperature fluctuation that can affect the printing quality.
Material: Plastic+Metal
Size: approx.2000*10*10mm

Package Includes:

1x HT-NTC100K Thermistor Temperature Sensor Cable

Product Features

  • Upgrade from the ordinary temperature probe directly exposed temperature measurement to resistance package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the heating block that support the thermocouple.
  • The temperature measurement range is increased from -50 °C~ +250°C to -50 °C ~ +350 °C. It helps a lot to print high-temperature filament, can replace the K-type thermocouple temperature. If need to print high-temperature filament, the HT-NTC100K thermistors are highly recommended.
  • The new version of HT-NTC100K temperature measuring thermistor adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
  • HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers’ convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
  • Can be used with the new version of the heater (the new heater can heat up to 350 degrees).

Visit The Website For More Information…

3D Pen UV Ink Cartridges, Impress Life Low Temperature Photo Curing Material Refill for 3D Printing and Drawing, Better 3D and Drawing Effect

Impress Life UV ink is used for our 3D printing pen, using imported raw materials operations as a carrier for the secondary
synthesis, performance excellence, to ensure that work in different material of solid degree and higher tinctorial yield.
The UV ink is suitable for print, crafts and so on. The photosensitive ink will get solidified quickly after LED curing for secs,
so you can draw in the air directly and finish your artwork more quickly.
It featured with high flexibility and scalability, make your drawing more smooth and no nozzle jammed.
No mess, nontoxic, you can touch it with hands, safe for child and pet.

Caution:

1. This UV ink can be print on hard media.
2. The LED-UV Ink can be used to print on the media directly. But for printing on coated porcelain and glass (Smooth Surface),
it should be use along the pre-treatment liquid.
3. Please note that ink properties may vary slightly with environmental change. (such as weather resistance and adhesion)
4. Please sealed and stored this ink in a dark, cool place, away from direct sunlight or sources of ignition.
5. Please use out within 2 months after unpacking.

Product Features

  • Each UV ink cartridge contains 15ml UV ink, you may draw about 50 feet at 1mm diameter
  • Package contains 6 colors UV ink: White/Purple/Yellow/Red/Green/Blue
  • Advantage: Rich ruby color, gloss, high saturation, strong somatosensory, excellent color performance. Fast curing low consumption, not blocking, greatly lower the cost. UV LED inks for wide format, printers offer extreme versatility for a wide range of indoor and outdoor application possibilities
  • Using: Can straightly be used on wood, KT board, glass, porcelain, metal, and other plane or bend material. Printing on the hard media. Note: Sealed and stored this ink in a dark, cool place, away from direct sunlight or sources of ignition
  • Expiry date: 12 months, please use out within 2 months after unpacking

Check Out Our Website For Details…

3D Pen HURRISE Newest 3D Printing Pen with Photosensitive Technology Room Temperature Safety Sensor and Environmental Material

THERE IS NOT SO MUCH MORE MEANINGFUL THAN LET CHILDREN DEVELOP THEIR CREATIVITY.

SAFE
Work with Light-cured pile-forming work principle principle, UV curing do not need to be heated in high temperature, lukewarm extrusion paint would not cause any damage to our children, taking care of every child’s safety.

ENVIRONMRNTAL
Adopt photosensitive resin filament to replace traditional high temperature molten chemical plastic, develop children’s environmental awareness from childhood.

CREATIVE
Subvert traditional 3d printer, update to the state of art technique to arouse children’s imagination, evoke their creativity, leading on the edge of the starting line.

Attention
Please Snip the ink cartridge off at the groove of the cap with scissors instead of pulling out.

Main Spec
3D Pen Net weight: 80g
Work Principle: Light-cured pile-forming
Graffiti Range: Unlimited
Forming Mode: Three-dimensional shape
Discharging Speed: Adjustable, 5 speeds
Operation Condition: 0~35℃
Working Voltage: 3.7V+/-0.5V
Tip Diameter:0.6 +/-0.1mm
Input voltage:5V

Package Includes
3D Pen * 1
Ink Cartridge * 2 (at random)
Manual * 1
USB charging cable * 1
Tray * 1
Backup Nozzle * 2

Product Features

  • SAFE AND STATE OF THE ART: Light-cured pile-forming work principle, extrusion temperature is 40 ℃-50℃, avoiding scalding children when molding, ensuring our children reach their full creativity in the safest environment.
  • G-SENSOR: The light indicator will turn off automatically according to the gravity when the pen is gripped horizontally, protecting children’s eyes.
  • BRILLIANT DESIGN: Adopt high quality engineering plastics nozzle to prevent jamming. 5 adjustable speeds, encourage children to be their own master.
  • EASY AND PORTABLE: The 3D pen is only 18 cm with 12 cm ink cartridge , allow children to do painting and give play to their unlimited creativity capriciously.
  • Certified: CE、FCC、ROHS, provides ultra safety for our lovely children to live and have fun happily and safely.

Check Out Our Website For Details…