MagiDeal 3D Printer Parts HT-NTC100K Thermistor Temperature Sensor High Temperature

Description:

Upgrade from the ordinary temperature probe directly exposed temperature measurement to resistance package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the heating block that support the thermocouple.
The temperature measurement range is increased from -50 °C~ +250°C to -50 °C ~ +350 °C. It helps a lot to print high-temperature filament, can replace the K-type thermocouple temperature. If need to print high-temperature filament, the HT-NTC100K thermistors are highly recommended.
The new version of HT-NTC100K temperature measuring thermistor adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers’ convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
Can be used with the new version of the heater (the new heater can heat up to 350 degrees).

Specification:

Model: HT-NTC100K thermistor temperature sensor components
Negative Temperature Coefficient (NTC) Thermistor Model: B3950
Temperature measurement head size: 3 * 15mm
Thermistor temperature measurement is stable. The temperature measurement of the upgraded HT-NTC100K can be up to 350 degrees, can effectively replace the K-type thermocouple. It helps much to solve the issues of strict requirements of K-type thermocouple wiring, and the line is long which is susceptible to get external interference and result in temperature fluctuation that can affect the printing quality.
Material: Plastic+Metal
Size: approx.2000*10*10mm

Package Includes:

1x HT-NTC100K Thermistor Temperature Sensor Cable

Product Features

  • Upgrade from the ordinary temperature probe directly exposed temperature measurement to resistance package temperature measurement. Temperature measurement head cylinder diameter 3mm, length 15mm, can be used with the heating block that support the thermocouple.
  • The temperature measurement range is increased from -50 °C~ +250°C to -50 °C ~ +350 °C. It helps a lot to print high-temperature filament, can replace the K-type thermocouple temperature. If need to print high-temperature filament, the HT-NTC100K thermistors are highly recommended.
  • The new version of HT-NTC100K temperature measuring thermistor adopts 304 stainless steel, with the internal temperature package to ensure the maximum service life with precision temperature measurement.
  • HT-NTC100K thermistor adopts white high-temperature cord, can bear higher temperature. And for customers’ convenience, the wires adopts line connection, the customer can tear the wires depends on their application. The high temperature line is double thicker than others in the market, not easy to break off.
  • Can be used with the new version of the heater (the new heater can heat up to 350 degrees).

Visit The Website For More Information…

3D printer NTC Thermistor Temp Sensor 100K for Reprap Prusa i3 Comgrow

Package included: 5pcs thermistors
Application : Heated bed or extruder of Reprap Prusa I3 3D Printer
Resistance value at 25°C=100K
Thermistor: small size 1.25mmx2.0mm glass bead
Wiring insulation: high temperature Teflon/PTFE.

Product Features

  • Use for heated bed or extruder
  • It has 2 pin female connector
  • Wire length: 1m/39.4 inches
  • Package include: 5 thermistors
  • Temperature sensor 100KΩ accuracy of ± 1%

Detailed Information available on our Homepage…

[Gulfcoast Robotics] HEX Screw-In M3 EPCOS Thermistor for 3D Printer Extruder Hotend. Working Temperature up to 300C. 2017 Version.

New 2107 Version with working temperature up to 300C. Leads insulated with fiberglass, thermistor glued with 600C rated ceramic compound.

Our Screw In Thermistor uses most popular in reprap community EPCOS B57560G104F.Hex brass body with M3x0.5 threaded stud allows you to easily screw the thermistor into a M3 hole with zero chance of it falling out halfway through a print.Simply tap the existing hole on your hot end with a M3 tap and screw in the thermistor. The thermistor leads are insulated in fiberglass Tubing, 2 Pole JST Style Connector is attached to the leads ends. Connection cable with mating JST connector for connecting with 3D printer electronics is included. Thermistor glued in housing with high temperature 600C rated ceramic glue. Maximum allowed temperature for prolonged time is 300C.

Package contents:

1 x Hex Housed Modular Thermistor assembled with PTFE tubing, JST female connector and NTC EPCOS B57560G104F 100k Thermistor.

Product Features

  • Working temperature 300C and higher, fiberglass insulated leads
  • Thermistor glued in with 600C rated ceramic compound
  • Connector type: JST 2 pin connector, 2.5mm spacing.

Detailed Information available on our Homepage…